Why is my computer making a buzzing noise : There are many ways you can get a buzz from your PC. If you’ve heard it before, there’s probably something wrong with your machine, but these noises aren’t always easy to fix. The following list contains all the most likely causes for a buzzing noise coming from your desktop or laptop.
Fans can become clogged with dust or tapping on a cable
All computers have fans to keep them cool. These are usually attached to heat sinks that dissipate excess heat produced in the system fan works best when it is kept free of dust, as obstacles reduce its effectiveness. If the blades get dirty, they simply cannot move freely through their bearings, causing vibration and noisy operation. This can also happen because the cable to the fan has been damaged during installation or over time due to normal use.
To check the condition of your cooling fans, open your case gently using screwdrivers or other blunt tools to avoid damaging internal components.
Pay particular attention to cables near the motherboard, as they break more often than others. Also look at each individual fan. You should find one or two that should remove the grime from the surface around the bearing. You can also use compressed air to gently blow on the blades themselves.
After cleaning, make sure that the fans are running smoothly again. It doesn’t hurt to give them a boost every now and then!
If you still hear a buzzing sound after checking your fans, try tapping lightly on the case itself.
The plastic cover may not feel like much protection from damage, but the metal frame underneath isn’t immune either. Any loose screws would do this.
An alternative cause for this type of noise is interference between the power cord and the wall outlet. Try moving the plug slightly until it stops producing the buzzing sound.
Also check that no part of the power cord touches anything electrically sensitive, such as another printed circuit board or a nearby grounded object.
A defective power cord or USB plug
It sounds obvious, but sometimes people accidentally remove the protective sheath around the end of the power cord. When this happens, current is exposed directly to the grounding point, where it can damage electronic equipment. This includes laptops, monitors, keyboards, mice, headphones, etc. An external ground fault monitor detects this current and turns off any device that was touched. Without detection, however, someone who plugs appliances into a badly damaged outlet could be seriously injured. There are signs that indicate the presence of a faulty plug, including:
a persistent buzzing sound
an unusual smell
the light indicator flashes red
In addition to protecting our gadgets, the sheath helps us detect foreign objects hitting the wire. Without it we wouldn’t know anything about a piece of paper sitting on top of the plug.
One way to test if this is the source of the buzzing sound is to unplug everything and then touch the tip of the wire closest to the outlet. If you see sparks flying over the connection, you are dealing with a defective product. But remember, even if it looks bad, electrical shorts aren’t necessarily dangerous. They pose a threat only if left unattended.
Please refer to your owner’s manual or contact the manufacturer directly to resolve the issue. Usually this involves replacing the entire electrical unit. Some manufacturers offer replacement kits, while others provide broken parts to repair the defect themselves.
One last thing worth mentioning is how easy it is to swap out memory modules in modern PCs. So if you had trouble finding the exact problem before, try swapping RAM sticks and see if that clears up the noise. Also make sure none of the affected pins hang over the edge of the slot.
A part may be loose in the holder
Faulty hardware mounting screws can occasionally loosen and cause vibration. Self-tapping screws are used in most cases today, but standard size wooden screwdrivers can also work. Make sure to properly tighten all fasteners by turning counterclockwise (counterclockwise) to prevent further movement. Then pay attention to any rattling or clicking noises.
The first step to diagnosing a loose screw is to confirm that it actually exists. Loosening of screws can happen due to repeated tightening and/or impact, corrosion, humidity, temperature changes, etc. Although it seems unlikely, the worst scenario is possible if a screw somehow manages to come out of its hole completely. fall. Ensure this by purchasing anti-loosening screws specially designed for this purpose. Just follow the instructions on the package. After tightening, check the position of the screw head.
Sometimes a screw needs to be replaced completely rather than just tightening. For example, if you are working on a hard drive enclosure, a loose screw can easily cause the mechanism to wobble unexpectedly. Not good! Fortunately, this kind of situation is quite rare these days thanks to standardized micrometers and better manufacturing processes.
When disk drives fail, mechanical movements in the enclosure stop suddenly. As such, they must rely solely on software to perform reads. Unfortunately, data stored on the drives must be physically moved in order to communicate with the operating system. Since the motors driving this action can fail, the resulting vibrations can cause a high pitched whine. Such occurrences are usually the result of improper maintenance procedures and poor quality control standards at third party suppliers.
Fortunately, most modern systems offer diagnostic tools that can detect various errors. Consult your owner’s manual for details.
Note that while these types of failures are very common, they should not stop anyone from seeking professional support.
Some solutions are:
- replace the entire drive
- remove the actuator arm plates and replace with new ones
- repair the engine mounting bracket
- Repairing a failed HDD requires special tools and knowledge.
Before attempting to take your computer apart, shut it down immediately, disconnect peripherals, and proceed gently to open the chassis.
Never force a screwdriver into tight spaces or attempt to pry discs off their spinners unless you are confident enough to handle delicate mechanisms. If necessary, enlist the help of a technician experienced with HDDs.
Power supply failure
Most power supplies have multiple outlets, allowing users to connect multiple accessories at once.
Each additional accessory creates an additional load on the PSU, putting a greater strain on the output level.
Overheated PSUs emit thick smoke containing burned particles and carbon monoxide. Ultimately, this leads to overheating cracks in the insulation layer.
Since power cords contain a conductive material, static discharge can ignite flammable gases when brought near oxygen.
Refer to your instruction manuals or owner’s manuals for information specific to your model. In general, though, you should look for bulging vents on the back panel and examine the wiring harnesses above the CPU connectors. If present, these indicators indicate that a blown fuse has occurred somewhere upstream.
Finally, if you have recently upgraded your machine, it is important to ensure that your old power supply remains compatible with your newer components. Otherwise, you risk getting incorrect voltages or destroying your newly purchased components.
Looking into the computer
After you’ve identified all possible sources of noise, hopefully you’ll be equipped with enough technical expertise to address future issues. However, if none of the previous reasons were correct, consider opening your laptop/desktop yourself and see if you can find it. If you can solve the problem yourself, you can do this even with the computer turned on, if that helps you determine the cause.
Alternatively, if you’re not very tech-savvy with computers, consider taking it to a local IT store and they’ll take a look at what’s wrong.
Have you ever gotten a strange noise from your computer? What did you do to find out what caused it? Share your experiences with us in the comments section below!